Shanghai Tanjiansteel Industry Co., Ltd.
Main products:HRC,CRC,GI,PPGI,steel
Contact Us
  • Contact Person : Mr. Wang Qin
  • Company Name : Shanghai Tanjiansteel Industry Co., Ltd.
  • Tel : 86-21-55892731
  • Fax : 86-21-55892731
  • Address : Shanghai,Shanghai,Room 802, Eight floor Shanghai Trade Center,No.800Quyang Road, Hongkou Disctrict
  • Country/Region : China
  • Zip : 200080

CRC Cold rolled coil

CRC Cold rolled coil
Product Detailed
Cold rolled steel coils thickness: 0.15mm-3.0mm width 914mm-1500mm grade: DC01 SPCC SPCE SPCEN DC03 DC04 DC05 CRC  cold rolled coilPropertiesFull Hard

High hardness, low tensile strength and ductility.


As cold rolled full hard coils are not suitable for most applications due to high hardness, ultimate tensile strength and low ductility, the coils are annealed to the recrystallization temperature in the Batch Annealing Facility (BAF) to improve the workability for various applications.

Tempered (Skinpass)

The surface roughness of Cold Rolled Coils and Cold Rolled Slit Coils is controlled by tempering.

Dimensions / Sizes


Thickness (mm) Width (mm) Inner Dia. (mm) Outer Dia. (mm)

Cold Rolled Coils

0.3 - 3850-16506101950

Cold Rolled Slit Coils

0.3 - 375/8006101950
Uses & Applications
Structural Quality (SQ)For applications in which the strength of the finished part, usually in load bearing structures, is of importance. In those cases, the mechanical properties required in the steel sheet as ordered must be specified. Such quality is used for manufacturing storage systems and shelves.Commercial Quality (CQ)For applications that involve simple bending or moderate forming. Sheets of such quality can be bent fully in any direction at room temperature, and used for manufacturing home appliances ( ovens, water heaters, refrigerators).
Drawing Quality (DQ)For applications that need greater degree of ductility, and it is more consistent in performance than CQ because of higher standards in production, selection and melting of steel. It is used for manufacturing furniture (tables).Deep Drawing Quality (DDQ)For applications that need higher degree of ductility, and it is more consistent in performance than DQ and When deep drawing qualities are required, the carbon may be reduced even further than the level for the DQ.
Extra-Deep Drawing Quality (EDDQ)For applications that need ultimate formability. Steel is vacuum degassed to provide superior internal cleanliness and reduced carbon levels. Stabilizing elements added during steel production combine with carbon and nitrogen to make it even more formable.

CRC Cold rolled coil

Copyright Notice @ 2008-2012 ECVERY Limited and/or its subsidiaries and licensors. All rights reserved.